|
Product Details:
Payment & Shipping Terms:
|
Features: | Small Noise, Small Vibration | Condition: | New |
---|---|---|---|
Type: | LXM Serise Roller Mill | Product Moisture: | ≤1 % |
Application: | Barite, Calcite, Limestone, Kaolin, Bentonite, Marble | Mill In Diameter: | 820-2300 Mm |
Warranty: | 12 Months | Classification: | Ore Grinding Mill |
High Light: | Mining Centrifugal Superfine Mill,LXM Centrifugal Superfine Mill,LXM superfine grinding mill |
LXM Serise Centrifugal Superfine Mill Of Ore Grinding Mill For Mining
1. Introduction of centrifugal superfine mill of Ore Grinding Mill
Centrifugal superfine mill (superfine mill for short) is a new generation of superfine mill equipment developed by our factory on the basis of advanced powder making equipment at home and abroad. Can replace Raymond mill, smooth production of ultrafine powder, fineness can be adjusted between 80 mesh -1500 mesh.
3. Application of High fine mill roller mill
High fine mill suitable for barite, calcite, potassium feldspar, talc, marble, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, glass, manganese ore, titanium ore, copper ore, chrome ore and other minerals, refractories, coal powder, carbon black, clay, bone powder, titanium dioxide, iron oxide, such as quartz, urea Morse hard The degree is not more than 7, humidity below 6% of non-flammable and explosive minerals, chemical building materials and other industries more than 300 kinds of materials.
3. Characteristics of centrifugal superfine mill of Ore Grinding Mill
(1) Small noise, small vibration;
(2) high pressure, much fine powder;
(3) Uniform wear of ring and roller, long service life, 3-5 times of ordinary Raymond mill;
(4) Suitable for hard material processing;
(5) The iron content of micro powder is low;
(6) Can operate continuously, during the operation does not affect the roller bearing room oil filling;
(7) Small power consumption, high efficiency, convenient installation and maintenance;
(8) There is no scraper feeding in the mill, and the failure rate is low.
4. Technical parameters of centrifugal superfine mill:
Technical parameters/Model | LXM820 | LXM1120 | LXM1300 | LXM1550 | LXM1700 | LXM1900 | LXM2200 | LXM2300 |
Mill in diameter (mm) |
820 | 1120 | 1300 | 1550 | 1700 | 1900 | 2200 | 2300 |
Production capacity(t/h) | 1~5 | 6~10 | 16~20 | 22~28 | 30~38 | 36~43 | 70~90 | 95~115 |
Particle size of grinding material (mm) |
0~25 | 0~30 | 0~35 | 0~45 | 0~50 | 0~55 | 0~60 | 0~65 |
product moisture(%) | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 |
Main motor power(kw) | 55 | 110 | 220 | 315 | 400 | 500 | 710 | 800 |
Device weight(t) | 16 | 27 | 45 | 75 | 90 | 115 | 160 |
5. Technical parameters of high fine mill
Type | -18 | -21 | -26 | -27 | -30 |
Feed size(mm) | 8-15 | 8-15 | 10-15 | 15-20 | 15-25 |
Finished size(mm) |
0.04-0.02 (400-600 mesh) |
0.04-0.02 (400-600 mesh) |
0.04-0.02 (400-600 mesh) |
0.04-0.02 (400-600 mesh) |
0.04-0.02 (400-600 mesh) |
Center shaft speed (rev/min) |
300 | 190 | 180 | 170 | 150 |
Motor power(kw) | 24-29 | 32.2 | 35.7-38 | 40-42.5 | 57.5-59.5 |
Contact Person: Mr. David
Tel: 86-18637916126