|
Product Details:
Payment & Shipping Terms:
|
| Model: | Spherical Ceramic Sand | Main Chemical Component: | Al.O:70~85%,Fe,O,≤5% |
|---|---|---|---|
| Shape: | Good Spherical | Thermal Conductivity (100~1000°℃): | 0.35～0.50 W/mK |
| Particle Size: | 0.053mm~2.50mm | Lin.exp.coeff. (20~600°℃,10⁸ ×K'): | 7.2 |
| Thermal Expansion: | 0.13%(10 Minutes At 1000℃) | Type: | Mining Machine Spare Parts |
| High Light: | Casting Used Spherical Ceramic Sand,Ceramic Sand 2.051g/Cm3,Ceramic Particle 2.051g/Cm3 |
||
Casting used Ceramsite Spherical Ceramic Of Mining Machine Spare Parts
1. Spherical ceramic sand for foundry Of Mining Machine Spare Parts
In order to reduce waste emissions and health hazards to people in classic foundry process, as well as to improve foundry efficiency, Luoyang Kailn Foundry Material Company has developed a new special foundry sand, ceramic sand.
Due to ceramic sand outstanding properties, ceramic sand has been widely used in most types of foundry process as an upgrade substitution of silica sand and special foundry sands.
Ceramsite Spherical Ceramic Of Mining Machine Spare Parts
2. CERAMIC SAND Characteristic Of Mining Machine Spare Parts
Anti Burn-on
High Reclamation Yield
Thermal Expansion Control
Wide Choice of Particle Size
Reduced Waste and Health Hazard
Good Flowability and Heat Conductivity
Low Resin Consumption and Gas Defects
| Main Chemical Component | Al.O:70~85%,Fe,O,≤5%,TiO.:3~4%,SiO::12~25% |
| Shape | Good spherical |
| Angularity Facto | ≤1.1 |
| Particle Size | 0.053mm~2.50mm |
| Bulk Density | 1.95~2.051(g/cm³) |
| Thermal Expansion | 0.13%(10 minutes at 1000℃) |
Properties(compare with other foundry sand)
| Ceramic sand | Quartz sand | Chromite | Zircon | Cerabeads | |
| Refractoriness | 1800℃/3272°F | 1730℃/3146°F | 1880℃/3416°F | 1825℃/3317F | 1825℃/3317°9 |
| Bulk density (g/cm³/b/ft') | 2/124 | 1.58/99 | 2.81/175 | 2.95/187 | 1.69/106 |
| pH | 7.3 | 6.6 | 7.9 | 5.7 | 7.2 |
|
Thermal conductivity (100~1000°℃) |
0.35～0.50(W/mK | 0.255(W/mK) | 0.258(W/mK) | 0.305(W/mK) | 0.223(W/mK) |
|
Lin.exp.coeff. (20~600°℃,10⁸ ×K') |
7.2 | 23 | 7.5 | 4.1 | 4.0 |
| Mohs' hardness | 6.5~7.5 | 6.0~7.0 | 5.5~6.0 | 7.0~8.0 | 5.0~5.5 |
| Mineralogical composition | Mullite+Corundum | Quartz +Feldspar | Chromite | Zircon |
Mullite (sintered mulite) |
| Grain shape | Spherical | Angular | Angular | Semi-angula | Spherical |
Ceramsite Spherical Ceramic Of Mining Machine Spare Parts
3. Parts of papticle size distribution Of Mining Machine Spare Parts
| spec. |
AFS30 |
AFS40 |
AFS50 |
AFS60 |
AFS65 |
AFS75 |
AFS100 |
AFS125 |
AFS150 |
|
| mesh | micron | |||||||||
| 10 | 1700 | |||||||||
| 14 | 1180 | |||||||||
| 18 | 850 | ≤5 | ||||||||
| 26 | 600 | 15~30 | ≤5 | ≤5 | ||||||
| 36 | 425 | 30~50 | 20~40 | 10~25 | ≤10 | ≤5 | ||||
| 50 | 300 | 20~35 | 25~40 | 25~35 | 15~35 | 10~25 | ≤10 | |||
| 70 | 212 | ≤10 | 10~30 | 25~35 | 25~35 | 15-30 | 10~30 | ≤3 | ≤2 | |
| 100 | 150 | ≤5 | ≤10 | 5~25 | 25~35 | 25~40 | 25~45 | 10~30 | 0~20 | ≤5 |
| 140 | 106 | ≤5 | ≤10 | 5~20 | ≤25 | 20~40 | 35~55 | 30~50 | 5~25 | |
| 200 | 75 | ≤2 | ≤5 | ≤5 | ≤10 | 15~35 | 25~45 | 40~60 | ||
| 281 | 53 | ≤1 | ≤1 | ≤1 | ≤5 | ≤10 | 0~20 | 25~35 | ||
| PAN | PAN | ≤0.5 | ≤0.5 | ≤0.5 | ≤2 | ≤5 | ≤15 | |||
|
AFS average finess range |
25~35 | 35~45 | 45-55 | 55-65 | 60-70 | 70~80 | 95~110 | 120~135 | 145~165 | |
Ceramsite Spherical Ceramic Of Mining Machine Spare Parts
Contact Person: Mr. David
Tel: 86-18637916126
