HRC65 Steel Castings And Forgings Rod Mill Rods Factory Price

The rod mill is driven by the motor through the reducer and the peripheral big gear reduction drive or by the low speed synchronous motor directly through the peripheral big gear reduction drive, the drive drum rotation. The barrel body is equipped with appropriate grinding media - steel bars. Under the action of centrifugal force and frictional force, the grinding media is lifted to a certain height, and the grinding medium falls off and falls off. By grinding material from the feed port continuous into the cylinder and the movement of the grinding medium crushing, and through the overflow and continuous feeding power products will be discharged out of the machine, for the next period of process operation.

The rod mill grinding medium for grinding rod, generally grinding rod length should not be more than 7 meters long, because the rod mill is very easy to cause the winding, therefore, the length of rod mill, not too long, grinding rod diameter of 75~150 mm.

The grinding rod should have sufficient rigidity and hardness in the process of using straight without bending, should not be very brittle, so as not to wear small enough in diameter and broken into pieces, but enough hours in wear, should be broken into small pieces, in order to discharge from the rod mill. If the rod mill is too soft, easy in the cylinder to rotate when bending, bending caused by grinding and premature failure of winding, winding rod grinding mill caused by difficult cleaning, waste of time.